Making The 150/300 Pidu Connection At The Odu - Motorola Canopy 300 Mbps Backhaul User Manual

7.7.3

Making the 150/300 PIDU Connection At The ODU

The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure no power is connected to the Canopy 150/300 PIDU or present on the cable before
connecting the ODU.
Step 1: Assemble the cable as described in
Step 3: Screw in the body of the weather
proofing gland and tighten
Issue 1.1 April 2006
7.7.1 above
Step 2: Insert the RJ45 connector making sure
that the locking tab snaps home
Step 4: Screw on the clamping nut and tighten
Page 41