Making The Connection At The Odu - Motorola Canopy 300 Mbps Backhaul User Manual

E1/T1 A Tx- (White and Orange)
E1/T1 A Tx+ (Orange)
E1/T1 A Rx- (Green and White)
E1/T1 B Tx- (Blue)
E1/T1 B Tx+ (Blue and White)
E1/T1 A Rx+ (Green)
E1/T1 B Rx- (Brown and White)
E1/T1 B Rx+ (Brown)
16.2

Making the Connection at the ODU

Looking at the back of the unit with the cable entry at the bottom. The Canopy 150/300 Mb
BH E1/T1 connection is the first hole on the left (Figure A3) and is labelled E1/T1.
The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure no power is connected to the Canopy 150/300 PIDU.
Issue 1.1 April 2006
Figure A2: RJ45 Pin Connection (T568B Color Coding)
E1/T1
Figure A3: Canopy 150/300 PIDU and E1/T1 Connection
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Lock Tab Underneath
FIBRE PIDU+
Page 153