Table of Contents
Advertisement
1
ABOUT THIS USER GUIDE
This guide covers the installation, commissioning, operation and fault finding of the Canopy
150/300 Mbps Backhaul.
1.1
Interpreting Typeface and Other Conventions
This document employs distinctive font to indicate the type of information, as described in
Table 1.
Font
variable width bold
constant width regular
constant width italic
constant width bold
constant width bold italic
This document employs specific imperative terminology as follows:
•
Type means press the following characters.
•
Enter means type the following characters and then press Enter.
•
Highlight means click anywhere in a row of data to highlight the entire row.
•
Select means use the mouse to click on or branch to the menu item that follows.
Use this table and the Glossary to aid in interpreting the technical acronyms used throughout
this User Guide.
150/300 BH
BH
Mb
OFDM
LoS
nLoS
NLoS
ODU
PIDU
DFS
PoE
This document also employs a set of consistently used admonitions. Each type of admonition
has a general purpose that underlies the specific information in the box. These purposes are
indicated in Table
Issue 1.1 April 2006
Table 1: Font types
Selectable option in a graphical user interface or settable
parameter in the web-based interface to a Canopy
component.
Literal system response in a command-line interface.
Variable system response in a command-line interface.
Literal user input in a command-line interface.
Variable user input in a command-line interface.
Canopy 150/300 Mbps Backhaul Radio
Backhaul
Mbps
Orthogonal Frequency Division Multiplexing
Line-of-Sight (Clear Line-of-Sight and Fresnel zone is clear)
near-Line-of-Sight (Clear Line-of-Sight, but Fresnel zone is blocked)
Non-Line-of-Sight (No Line-of-Sight and Fresnel zone is blocked)
Outdoor Unit (Integrated or Connectorized Radio)
Powered Indoor Unit
Dynamic Frequency Selection
Power over Ethernet
2.
Type of Information
Page 14
Advertisement
Table of Contents
