Figure 36: License Key Data Entry - Motorola Canopy 300 Mbps Backhaul User Manual

A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Quick Install Guide. If
subsequently the license key has been mislaid, replacement keys can be applied for online or
via your distributor.
If a valid license key is not detected in the unit's non-volatile memory then the user is
prompted to enter a valid key. It should be noted that Canopy 150/300 Mb BH units are
shipped as link pairs and, as such, valid license keys are entered during the production
process. To enter a license key simply type or paste the license key into the data entry box
(Figure 36) and click the 'validate license key' button.
8.3.4.2 Internet Protocol Configuration
Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP)
configuration.
IP Address Internet protocol (IP) address. This address is used by the family of Internet
protocols to uniquely identify this unit on a network.
Issue 1.1 April 2006

Figure 36: License Key Data Entry

Figure 37: Installation Wizard Internet Protocol Configuration
Page 76