Hardware Installation; Installation Instructions - Motorola AP6532 Series Installation Manual

4
AP6532 Series Access Point: Installation Guide
2

Hardware Installation

2.1 Installation Instructions

The AP6532 Access Point mounts either on a wall (with wide-shoulder screws) or on a suspended
ceiling T-bar. This unit is not designed for mounting on a desk.
To prepare for the installation, perform the following:
1. Match the model number on the purchase order with the model numbers in the packing list
and on the case of the device shipped.
2. Verify the contents of the box include the intended AP6532 Access Point and that the
included hardware matches the package contents on page 2.
Part Number
AP-6532-66030-US
AP-6532-66030-OUS
AP-6532-66030-WW
AP-6532-66040-US
AP-6532-66040-OUS
AP-6532-66040-WW
NOTE
3. Review site survey and network analysis reports to determine the location and mounting
position for the AP6532 Access Point.
802.11a/b/g/n dual radio integrated antenna configuration
United States model
802.11a/b/g/n dual radio integrated antenna configuration
United States model for outdoor installation
802.11a/b/g/n dual radio integrated antenna configuration
World Wide model
802.11a/b/g/n dual radio external antenna configuration
United States model
802.11a/b/g/n dual radio external antenna configuration
United States model for outdoor installation
802.11a/b/g/n dual radio external antenna configuration
World Wide model
In the above part numbers,
specifies which country the model is designed for. A country code of
"WW" represents a world wide model. The letter O preceding the 2-digit
country code specifies the model is designed for outdoor installation.
Description
represents the 2-digit country code which
XX