Table of Contents
Advertisement
Step 1: Assemble the cable as described in
Step 2: Insert the RJ45 connector making
above
sure that the locking tab snaps home
Step 4: Screw on the clamping nut and
Step 3: Screw in the body of the weather
tighten
proofing gland and tighten
Should it be necessary to disconnect the
Canopy 150/300 Mb BH E1/T1 cable at the
ODU this can be achieved by removing the
weather proofing gland and depressing the
RJ45 locking tab with a small screwdriver as
shown opposite.
Issue 1.1 April 2006
Page 154
Advertisement
Table of Contents
