Motorola Canopy 300 Mbps Backhaul User Manual page 72

Receive Modulation Mode Detail This supplies the user with information regarding the
receive modulation mode in use. Possible values are:
•
Running at maximum receive mode
•
Running at user-configured Target Modulation Mode
•
Restricted because Installation is armed
•
Restricted because of byte errors on the wireless link
•
Restricted because a DFS channel change is in progress
•
Restricted due to the low Ethernet link speed
•
Limited by the radio conditions
Signal Strength Ratio The Signal Strength Ratio is the ratio of the power received by the
Vertical / Horizontal receivers.
Wireless Link Availability Expresses the link availability as a percentage of time since the
first successful registration after a system restart. Expressed as a percentage to four decimal
places.
Byte Error Ratio The ratio of detected Byte errors to the total number of Bytes since the last
system reboot. This is a true measure of link quality as this measurement is made continually
using null frames when there is no user data to transport.
Statistics Page Refresh Period The statistics page refreshes automatically according to the
setting entered here (in seconds).
Reset System Counters By pressing this button all counters in the system are reset to zero.
This not only affects this page for example the Elapsed Time Indicator is also reset.
Reset System Histograms All histograms are reset, and the calculation period is restarted.
Issue 1.1 April 2006 Page 71