Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
Disable the Automatic Firmware Check
By default, the base station automatically checks for new firmware, but you can disable this option.
To disable the automatic firmware check:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings > Device Info > Firmware Update.
The Firmware Update page displays.
5.
Clear the Automatic Check check box.
6.
Click the APPLY button.
Your settings are saved.
7.
Click the Close icon.
The Dashboard page displays.
Manage the Configuration
You can back up (save) your custom configuration settings for the base station and cameras, either together
or individually, so that you can restore the configuration later or apply it to another base station, camera, or
both.
You can restore the base station settings either to the same base station or, for quicker setup, to another
base station if you use more than one base station in your surveillance system.
Manage Base Station Settings
37
Access the Base Station for the First Time
on
Advertisement
Table of Contents
