Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
CAUTION:
8.
Click the OK button.
The configuration is copied to the selected slot and the Dashboard page displays.
Copy a Camera Configuration From Another Camera Slot
You can copy all or part of the camera configuration from another camera slot. That is, you can copy the
configuration from another camera slot to a selected camera. You can select to copy the video settings,
motion sensitivity, schedule, and armed state.
To copy all or part of the camera configuration from another camera slot:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera to which you want to copy the configuration from the other camera slot, click the Settings
icon and select Configuration Manager > Copy From.
The Copy Configuration From page displays.
5.
Select a Source Slot check box.
This is the camera slot from which you are copying the configuration.
6.
Select one, several, or all of the Settings for copy check boxes.
7.
Click the COPY button.
The Copy Configuration page displays.
When you click the OK button, all selected settings in the destination slot
are overwritten.
Manage Camera Settings
Access the Base Station for the First Time
59
on
Advertisement
Table of Contents
