Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera that you want to configure, click the Settings icon and select Video Settings.
The Video Settings page displays.
5.
Select or clear the Rotate Image check box.
6.
Click the APPLY button.
Your settings are saved.
7.
Click the Close icon.
The Dashboard page displays.
Manage Motion Sensitivity for a Camera
You can manage the motion sensitivity for a camera by calibrating the camera sensitivity and by manually
setting the sensitivity.
Note
You can increase the battery life of the camera by lowering the motion sensitivity,
thereby reducing false positive motion triggers.
For information about copying an existing motion sensitivity configuration from a selected camera to another
camera slot, see
Copy a Camera Configuration to Another Camera Slot
For information about copying an existing motion sensitivity configuration from a camera slot to a selected
camera, see
Copy a Camera Configuration From Another Camera Slot
Calibrate the Motion Sensitivity for a Camera
The motion calibration process lets you adjust the motion sensor to accurately detect motion for the camera
placement. During the calibration process, the camera functions in motion detection feedback mode in which
the camera LED lights when motion is detected so that you can choose the best sensitivity setting. The
motion sensor can detect people up to 25 feet away and at 130 degrees left or right of the camera.
Calibrating is an interactive process between the camera and the local browser interface. It is easier to do
this with two people.
To calibrate the motion sensitivity for a camera:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
Access the Base Station for the First Time
Manage Camera Settings
49
on page 58.
on page 59.
on
Advertisement
Table of Contents
