Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
Your settings are saved. Because you changed the IP address, you are disconnected from the base
station. For information about how to reconnect, see
16.
Manage the System Time
By default, the time zone of the location in which the base station is operating is automatically detected and
the internal clock of the base station is automatically synchronized over the Internet with a default Network
Time Protocol (NTP) server. You can also specify a time zone manually and specify custom NTP servers
or set the time manually.
To manage the system time for the base station:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings > System Time.
The System Time page displays and shows the current date and time.
5.
To manually select a time zone, select a time zone from the Time Zone menu.
6.
To specify custom NTP servers, do the following:
a.
Select the NTP configuration Manual radio button.
b.
In the Server 1 and Server 2 fields, specify the host names or IP addresses of NTP time servers.
7.
To manually set the time, do the following:
a.
Select the NTP configuration Set Date and Time radio button.
b.
Click in the Current Date field.
A calendar pop-up window opens.
c.
Select a date.
d.
From the Current Time menus, select the hour, minutes, and seconds.
8.
Click the APPLY button.
Your settings are saved. You must restart the base station for the new time settings to take effect.
Access the Base Station for the First Time
Manage Base Station Settings
32
Access the Base Station for the First Time
on page
on
Advertisement
Table of Contents
