Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
5.
Move the slider to set the motion sensitivity.
A lower setting means that the camera is less sensitive for motion. A higher setting means it is more
sensitive. The default sensitivity setting is 80.
6.
Click the APPLY button.
Your settings are saved.
7.
Click the Close icon.
The Dashboard page displays.
Assign a Static IP Address to a Camera
By default, the DHCP client of the camera is enabled and a DHCP server (or router that functions as a DHCP
server) in your network assigns a dynamic IP address to the camera. If your network does not include a
DHCP server or you prefer a static IP address configuration, you can assign a static IP address to the
camera.
To assign a static IP address to a camera:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera that you want to configure, click the Settings icon and select Network.
The Network page displays.
5.
Select the IPv4 Configuration Manual radio button.
6.
Enter the static IP address information in the IP Address, Subnet Mask, and Default Gateway fields.
7.
Click the APPLY button.
Your settings are saved. The video stream might be interrupted and you might need to readd you camera
to your VMS.
8.
Click the Close icon.
The Dashboard page displays.
Access the Base Station for the First Time
Manage Camera Settings
51
on
Advertisement
Table of Contents
