Camera Label - NETGEAR VNC4030-111PAS User Manual

FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
synchronize the camera with) the base station. For more information about adding the camera to the base
station, see Synchronize a Camera With the Base Station
Table 2. LED descriptions
Camera state LED description
General Blinks blue once. The camera was powered on.
Blinking blue and amber. A firmware update is in progress. Do not turn off the camera.
Off. The camera is either powered off or is powered on and is synchronized with a base station.
Synchronizing Slow blinking blue. The camera is attempting to synchronize with a base station.
Fast blinking blue. The camera is synchronizing with a base station.
Fast blinking amber. The camera failed to synchronize with a base station.
Charging Fast blinking blue. The camera is connected to power and is charging.
Solid blue. The camera is powered on and the battery is fully charged.
Slow blinking amber. The camera battery charge is low.
Fast blinking amber. The power connection failed.

Camera Label

The camera label, also referred to as the product label, is on the bottom panel. The label shows the serial
number and other information for the camera.
Figure 8. Camera label
Introduction and Hardware Overview
12
on page 15.