Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
Change the Time for an Arming Schedule Block
You can change the time for an existing arming schedule block. You cannot change the day or days.
To change the time for an arming schedule block for a camera:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera that you want to configure, click the Settings icon and select Schedule.
The Schedule page displays. Enabled schedule blocks show green. Disabled schedule blocks show
gray.
5.
Click the schedule block that you want to change.
The Schedule Block page displays.
6.
Click the Edit Block link.
The Edit Block page displays.
7.
From the Start and End menus, select the start and end times (hours and minutes).
8.
Click the PREVIEW button.
The Schedule page displays and shows the modified schedule block.
9.
Click the APPLY button.
Your settings are saved.
10.
Click the Close icon.
The Dashboard page displays.
Access the Base Station for the First Time
Manage Camera Settings
55
on
Advertisement
Table of Contents
