Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera that you want to arm or disarm, below the camera slot that shows the camera snapshot,
move the button.
If the button shows green, the camera is armed. If the button shows gray, the camera is disarmed.
Take a Camera Snapshot
You can take a snapshot of a camera view. Doing so refreshes the image in the camera slot on the Dashboard
page, which can be helpful if you adjust or fine-tune the position of the camera.
To take a camera snapshot:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera for which you want to take a snapshot, click the Take Snapshot icon.
The snapshot displays in the camera slot on the Dashboard page.
Access the Base Station for the First Time
Access the Base Station for the First Time
Manage Camera Settings
45
on
on
Advertisement
Table of Contents
