Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
9.
Click the RESTART BASE STATION button.
The page displays a confirmation request. Note that restarting the base station causes camera data
streams to be interrupted.
10.
Click the OK button.
The base station restarts.
Change the Flicker Rate
The flicker rate (or frequency) that you must use for the camera depends on the region in which you use
the camera. If you use the camera in North America, change the flicker rate to 60 Hz. For most other regions
and countries, use 50 Hz. The flicker rate applies to all cameras that you add to the base station.
If you see flickering light in a video stream, change the flickering rate.
To change the flicker rate:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings > Flicker Frequency.
The Flicker Frequency page displays.
5.
Select the 50 Hz or 60 Hz radio button.
6.
Click the APPLY button.
Your settings are saved.
7.
Click the Close icon.
The Dashboard page displays.
Manage Base Station Settings
33
Access the Base Station for the First Time
on
Advertisement
Table of Contents
