Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
To manually add a camera to Milestone Arcus:
1.
Log in to the ReadyNAS.
2.
In the Apps section of the Overview page, click the Milestone Arcus Surveillance link.
If the link does not display, click the Apps section heading.
The Milestone Arcus login page displays.
3.
Log in by doing one of the following:
•
No user account exists. Click the Log in button.
•
A user account exists. Do the following:
a.
Enter your user name and password in the user name and password fields.
b.
Click the arrow button.
The Milestone Arcus Home View page displays.
4.
Select Settings > Cameras.
The Cameras page displays.
5.
Click the + Add Camera button.
The camera fields displays.
6.
Enter the IP address of the camera and the user name and password that are associated with the
camera.
For a FlexPower camera, the camera user name is admin and the default password is password. For
information about viewing the IP address of a FlexPower camera, see
on page 57.
If the camera is at a remote location, you might need to add the port number after the IP address. (Use
the format ipaddress:portnumber.)
7.
Click the OK button.
The camera is added to Milestone Arcus and, if a sufficient number of licenses are available, the camera
output displays on the Milestone Arcus Home View page.
Add the User Name and Password for Camera Access in
Milestone Arcus
If the camera user name and password are not automatically detected by Milestone Arcus, you can enter
the camera credentials manually.
To add the user name and password that let the Milestone Arcus access a camera:
1.
Log in to the ReadyNAS.
2.
In the Apps section of the Overview page, click the Milestone Arcus Surveillance link.
If the link does not display, click the Apps section heading.
Set Up FlexPower With Milestone Arcus or Another VMS
View Information About a Camera
63
Advertisement
Table of Contents
