NETGEAR VNC4030-111PAS User Manual page 42

FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For
example, if you are connected to the base station's local browser interface,
do not close the browser, click a link, or load a new page. Do not turn off the
base station. Wait until the base station finishes restarting and the Power LED
turns solid green.
For information about how to log in to the base station, see
on page 16.
Manage Base Station Settings
42
Access the Base Station for the First Time