Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
Factory Default Settings
You can reset the base station to the factory default settings, which are shown in the following table.
For more information about resetting the base station to its factory settings, see
Factory Default Settings
The following tables show the factory default settings of the base station and the camera.
Table 3. Base station factory default settings
Feature
User login domain name
User name
Login password
(case-sensitive)
DHCP client
System time
Email settings and
notifications
Table 4. Camera factory default settings
Feature
User name
Login password
(case-sensitive)
DHCP client
on page 40.
Default Setting
FlexPowerBS-xxx
The xxx represent the last three digits of the base station serial number,
which is on the base station label.
The base station does not require a user name.
password
You must change this password when you access the base station for the
first time.
Enabled so that the base station receives an IP address from a DHCP server
in the network.
Automatically detected through a default NTP server.
None configured.
Default Setting
admin
password
Enabled so that the camera receives an IP address from a DHCP server in
the network.
Factory Default Settings and Technical Specifications
67
Reset the Base Station to
Advertisement
Table of Contents
