Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
enable SMTP for the email account. To find out about the SMTP server requirements, visit the support
site for your email provider.
10.
Click the APPLY button.
Your settings are saved.
11.
Click the Close icon.
The Dashboard page displays.
Add Email Recipients
After you set up the SMTP server settings for the base station (see
Settings
on page 26), you can add more email recipients.
To add email recipients:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Email Notifications > Email Settings.
The Email Settings page displays.
5.
Click the Recipients link.
The Recipients page displays.
6.
Enter one or more email addresses.
7.
Click the APPLY button.
Your settings are saved and the Email Settings page displays again.
8.
Click the Close icon.
The Dashboard page displays.
Manage Base Station Settings
28
Configure the Base Station SMTP Server
Access the Base Station for the First Time
on
Advertisement
Table of Contents
