Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Configuration Manager > Restore.
The Restore Configuration page displays.
5.
Click the UPLOAD button.
6.
Follow the instruction of your browser to navigate to and select the configuration file.
The configuration file is a
After you select the file, the Base Station Settings check box and the Cameras Settings check box
display. Both check boxes are selected.
7.
To restore only one selected item, clear one of the check boxes.
8.
Click the RESTORE button.
The configuration is restored and the base station reboots.
Restart the Base Station From the Local Browser Interface
You can restart the base station remotely from the local browser interface. This option is convenient if you
cannot easily access the base station or if you access the base station from a remote location.
To restart the base station:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the IP address that is assigned to the base station.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings.
The Base Station Settings page displays.
5.
Click the RESTART BASE STATION button.
A confirmation request displays.
6.
Click the OK button.
file or a
file.
.txt
.dat
Manage Base Station Settings
39
Advertisement
Table of Contents
