Using The Facsimile Machine As A Scanner; Setting The Pc To Use The Facsimile Machine As A Scanner; Scanning With The Facsimile Machine - Xerox Document FaxCentre 165c Service Manual

3 USING THE FACSIMILE MACHINE AS A SCANNER

The LinkFax 8 communication module makes it
possible for the facsimile machine to be used as
a scanner to scan in documents.
SETTING THE PC TO USE THE FACSIMILE
MACHINE AS A SCANNER
In order for your facsimile machine to be used as
a scanner, the parallel port of the PC must be setup
as described below:
1
Double click on the LinkFax 8 group icon:
2
Double click on the LinkFax 8 icon to enter the
communication environment:
3
Click on the icon:
4
Click on the name of the PC port (LPT1 or LPT2)
to which the facsimile is connected and click on
OK to confirm.
12-8
SCANNING WITH THE FACSIMILE
MACHINE
The scanning of a document using the facsimile
machine is performed in the communication
environment, whereas the document is managed
in the Windows or WinFax environment.
1
Place the document to be scanned onto the docu-
ment feeder (make sure that the number of pages
does not exceed the maximum number supported
by the facsimile machine).
2
Move to the communication environment.
... and click on the
3
Set the scanning parameters:
• Scan to File, to assign a name, format and
destination file to the acquired document;
• Scan to Fax Manager, with predefined name
and format;
• Contrast: normal, dark, or light;
• Resolution in dpi (dots per inch): 200 x 100,
or 200 x 200;
• Image: Text (line art), Gray tones (with 32
shades of gray);
XEROX DFC165 & DWC165c Service Manual
icon: