Xerox Document FaxCentre 165c Service Manual page 106

4) Clean the document feed rollers with a cloth soaked in a neutral detergent (see
figure 7-7), reassemble the ejector roller and then close the printer cover.
eject
roller
7.1.7.2 Cleaning the Mirrors
This procedure should only be carried out if, when copying a blank sheet, vertical black
lines appear on the copy.
1) Remove the operator console (see section 7.2.6)
2) Remove the scanning plate (see section 7.2.10)
3) Remove the document ejector roller (see section 7.1.7.1)
4) Lift the right-hand side of the glass and slide it out from the left (fig. 7-8)
XEROX DFC165 & DWC165c Service Manual
Fig. 7-7
Fig. 7-8
pick-up
roller
lift glass on this side
7-7