5.2.3 Printing the Communication Protocol
1) The facsimile machine is in standby mode.
b)
service" mode and select PRINT PROT. DUMP
E nt er "
c) Make sure that there is paper in the ASFand then press
START: the data shown in fig. 5-1 will be printed and then
the facsimile machine will return to standby mode.
The protocol status is presented, session by session, by means of the following fields:
TIMER
Indicates the times, in minutes : seconds, at which the signals were
exchanged during the session
LOCAL
Indicates the signals, represented by a hexadecimal code and a
mnemonic code, sent by the local facsimile machine
REMOTE Indicates the signals sent by the correspondent's facsimile machine
FIF
Indicates the structure of the signals (FIF = Facsimile Information
Field) in hexadecimal code.
XEROX DFC165 & DWC165c Service Manual
Setting
Fig. 5-1
Display
AUTOMATIC RX
09-05-95
14:58
PRINT PROT DUMP
START/STOP/← /→
PRINT PROT.DUMP
START/STOP
5-9