install it now following the instructions given
in the guide.
CREATING 3.5" INSTALLATION DISKETTES
The installation CD can be copied onto 3.5"
diskettes. This makes it possible to install
LinkFax 8 on PCs that are not equipped with a
CD ROM drive.
1
Power on the PC and wait for Windows 95 to
become active. Then insert the CD in the CD
ROM drive.
2
From the Start menu, select Run and type
x:makedsk, where x is the name of the CD ROM
drive (for example, d). Click on OK to confirm:
3
Select your mother language, if it is not already
selected and click on OK to confirm; an indica-
tion will be given of how many diskettes are
required for the copying process:
4
Attach a label to the diskette, with the corre-
sponding number, then place it in drive A and
click on OK to confirm:
• if the diskette is not a blank one, the fol-
lowing message is displayed:
9-10
... asking you to confirm (OK) formatting of
the diskette;
• if the diskette is blank, it is automatically for-
matted.
WARNING
If, on completion of the formatting process,
the following message is displayed:
... it means that the diskette is damaged:
replace it with another diskette and click on
Retry.
5
The copying process starts automatically, copy-
ing files from the CD to the diskette:
On completion of the copying process, you will
be prompted to insert the next diskette: remove
the first diskette from the drive and repeat steps
4 and 5. When the last diskette has been cop-
ied, the following message is displayed:
... informing you that the diskette creation proc-
ess is complete. Click on OK to confirm.
XEROX DFC165 & DWC165c Service Manual