Removing The Power Supply And Ncu Boards - Xerox Document FaxCentre 165c Service Manual

7.2.4 Removing the Power Supply and NCU Boards

1) Remove the power supply unit (see section 7.2.3)
2) Unscrew the two screws on the shield and remove it (see fig. 7-21)
screw
3) For the power supply board, remove the two screws and ground plate (see fig.
7-22)
power supply
board
XEROX DFC165 & DWC165c Service Manual
Fig. 7-21
Fig. 7-22
shield
screw
screws
ground
plate
7-15