Updating The Linkfax 8 Module - Xerox Document FaxCentre 165c Service Manual

• Confirm the Select Port button:
The Redirect to Parallel button is now ac-
tive.
• Confirm the Redirect to Parallel button:
• Select the parallel port to which you wish
to redirect the serial port (LPT1 in the exam-
ple):
and click on OK to confirm:
9-8
• Complete the procedure by clicking on OK.
• Click on the Unredirect button to restore
standard port management.

UPDATING THE LINKFAX 8 MODULE

Having performed the initial installation of the
LinkFax 8 module, you may need to carry out
one of the following procedures:
• Adding components to a previous partial
installation: repeat the installation procedure
by selecting the required elements. Since Fax
Manager cannot be selected, it will be rein-
stalled.
• Installing a new version of the current
module:
1
Carry out the installation procedure up to the
point where you have selected and confirmed
your mother language; this time a message
will appear informing you that the module
is already installed and giving instructions
on how to continue:
2
Continue by selecting the components and
applications you require: during the installa-
tion procedure the new elements will be
added to those already installed in the pre-
vious version, and the existing elements will
be updated.
XEROX DFC165 & DWC165c Service Manual