Carriage Test - Xerox Document FaxCentre 165c Service Manual

e) Reassemble the roller and close the console.
f) Press START
g) Press START once again: the LED array lights up to
automatically check the white level, and the result is
saved to ensure correct CCD operation
Warning:
Should the blank sheet not be correctly positioned, a
beep is generated as you press START.
h) Press STOP to switch off the LED array.

6.1.9 CARRIAGE TEST

This test MUST be carried out after replacing: the carriage, carriage motor or printer
unit.
a) The facsimile machine is in standby mode
b) Get access to the system test menu and select the
CARRIAGE TEST option
c) Press START: the carriage starts moving from right to
left and gradually increases its field of movement until it
reaches the left-hand side of the machine, and then it
repeats this procedure.
XEROX DFC165 & DWC165c Service Manual
Setting
Setting
Display
SCANNER SHADING
START/STOP
SCANNER SHADING
STOP
Display
AUTOMATIC RX
09-05-95 14:58
CARRIAGE TEST
START/STOP/← /→
CARRIAGE TEST
STOP
6-11