Feeding Special Papers Manually On The Linkfax Model - Xerox Document FaxCentre 165c Service Manual

automatic
sheet
feeder
3) Close the cover of the ASF and set the FORMAT parameter in the PRINTER
PARAMETERS menu to the value that corresponds to the size of the paper and
width of the tray (see section 3.2.1).
4) Make a copy to check that the job has been carried out correctly: if any of the
factors do not coincide, the following message will appear:
5) To eliminate the error, proceed as follows:
switch off the facsimile machine
l
remove the ASF and check that the distance between the inner sides corre-
l
sponds to the width of the paper used
power on the facsimile machine and check that the FORMAT parameter
l
corresponds to the previous setting made
reinsert the ASF.
l

3.1.7 Feeding special papers manually on the LinkFax model

When you use the LinkFax model as a printer, the following special papers can be
used: Transparency film (with backing), Transparency film with border, Glossy
paper, Coated paper, and Thick paper.
If the paper to be used is not easily fed into the facsimile machine (i.e. it is too thick,
too heavy or too smooth, as when transparency films with border and thick paper
are used), it is necessary to feed it manually (see chapter 10, Using the facsimile
machine as a printer, Printing with LinkFax 8).
XEROX DFC165 & DWC165c Service Manual
Fig. 3-13 Inserting the ASF and the paper
PAPER ERROR
PRESS STOP
cover
3-11