Introduction; Main Features - Xerox Document FaxCentre 165c Service Manual

The two models referred to in this manual are desktop facsimile machines with a
bubble ink jet printing system which complies with the ITU-TS G3 standard for document
transmission and reception.
The most suitable factor to distinguish between the two models, similar in appear-
ance, is the possibility of using a monochrome print head only or both monochrome and
colour print heads.
The colour model, once connected to a PC equipped with the LinkFax 8 software
communication module, can be transformed into a multifunctional product able to
perform both printer and scanner functions in addition to the facsimile traditional
features. The colour print head must be used only for printing purposes. All standard
facsimile functions require a monochrome print head. In this manual, the two models
are referred to as follows:
standard model (monochrome)

1.1 MAIN FEATURES

• Bubble ink jet printing
The facsimile machine prints on plain paper (standard model) or special paper
(LinkFax model) in various formats (A4, Letter, Legal).
• Memory capacity
The facsimile machine has a memory which enables operations such as One-
touch Dialling, Speed Code Dialling, Broadcasting Transmission, Delayed Trans-
mission and Substitute Reception, as well as the storage of parameters, data and
documents. This memory is powered by a backup battery in the event of a power
failure.
• Half tones
In the scanning of documents, a scale of 64 half tones can be used for a higher
XEROX DFC165 & DWC165c Service Manual

1. INTRODUCTION

LinkFax model (colour)
1-1