Load Default; Xerox Dfc165 & Dwc165C Service Manual; Scanner Shading - Xerox Document FaxCentre 165c Service Manual

6.1.7 LOAD DEFAULT

This procedure is used for loading the default values of the service switches for the
current country version of the facsimile machine.
a) The facsimile machine is in standby mode
b) Get access to the system test menu and select the LOAD
DEFAULT option
c) Press START
d) Press START once again: the default values of the U.K.
service switches are automatically set in place of the
current ones, clearing the static RAM and thus deleting
all data (reports) set by the user.

6.1.8 SCANNER SHADING

This test MUST be carried out after replacing: the scanner unit, motherboard or CCD
board. It must also be carried out after making the CCD adjustment (see section 6.3).
a) The facsimile machine is in standby mode
b) Get access to the system test menu and select the
SCANNER SHADING option
c) Open the console and remove the ejector roller (see
section 7.2.11)
d) Place a blank sheet (folded in two) onto the glass of the
optical reader so that it covers the glass entirely but not
the document sensor (see section 2.2.2).
6-10
Setting
Setting
XEROX DFC165 & DWC165c Service Manual
Display
AUTOMATIC RX
09-05-95 14:58
LOAD DEFAULT
START/STOP/← /→
LOAD DEFAULT
START/STOP
Display
AUTOMATIC RX
09-05-95 14:58
SCANNER SHADING
START/STOP/← /→