Removing The Motherboard - Xerox Document FaxCentre 165c Service Manual

4) For the NCU board, remove the remaining screw (see fig. 7-23).
NCU board
7.2.5 Removing the Motherboard and the System Firmware
1) Remove the power supply unit (see section 7.2.3)
2) Remove the screw on the base (fig. 7-24), free the cables from their clips, unplug
all the motherboard connectors and flat cables and pull the motherboard out from
the rear
7-16
screw
screw
Fig. 7-23
Fig. 7-24
XEROX DFC165 & DWC165c Service Manual