Managing Facsimile Functions Using Smartdevicemonitor For Admin; Lan-Fax Operation Messages - Xerox C3000 Facsimile Reference Manual

Fax via Computer
Managing Facsimile Functions Using SmartDeviceMonitor for
Admin
You can check information about this machine's fax functions using a computer
and save files on a computer using SmartDeviceMonitor for Admin.
Note
❒ For details about SmartDeviceMonitor for Admin and its installation, see
"Monitoring and Configuring the Printer", Network Guide.
❒ For details, see Network Guide and SmartDeviceMonitor for Admin Help.
Reference
"Monitoring and Configuring the Printer", Network Guide

LAN-Fax Operation Messages

This section explains typical operation error messages displayed on the comput-
er when using the LAN-Fax Driver, and solutions to those messages.
6
Cannot connect to the de-
vice.
The number of entries in
Destinations exceed the
limits. Up to 500 entries
can be entered.
"LAN-Fax" has already been
launched. Cannot launch it
again.
Failed to allocate memory.
260
Message Causes and Solutions
Check the network connection.
Check that the power is turned on.
The number of destinations specified exceeds the
maximum possible. The maximum number of desti-
nations that can be specified at one time is 500.
The [LAN-Fax] dialog box is already open. Quit LAN-
Fax once, and then start it up again.
Available memory on the computer is insufficient.
Quit applications currently not in use.