Rep 19 Control Panel / Scanner Chassis - Printer - Xerox FaxCentre F116 Service Manual

Repairs/Adjustments

REP 19 Control Panel / Scanner Chassis - Printer

Parts List on PL 2
Tools
• Phillips screwdriver.
• Flat screwdriver.
Preliminary Steps
• Remove the rack with the CPU board,
Disassembly
• Open the control panel by means of its lever, remove the two mounting screws.
• Close the control panel and open the scanner chassis by means of its lever. Hold the
scanner chassis/control panel, and use a flat screwdriver as a lever in the two notches
indicated by the arrows in the figure above to loosen the mounting clips and remove
the scanner chassis/control panel.
4-28
REP 18.
Figure 1.
9/04
Mounting
screws
FaxCentre F116/F116L