Optional Components; Hooking Up Optional Components - Sony CMT-SE7 Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
Optional TV
A
A COMPONENT VIDEO OUT
jacks*
Use an optional video cord to connect a TV. If
your TV accept progressive format file signals,
you must use this connection and set
"COMPONENT VIDEO OUT" to
"PROGRESSIVE" in "Adjusting the TV
screen" (page 28).
B S VIDEO OUT jack*
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
From the audio output jacks of
the optional analog component
B
Optional analog component
C
F
To the digital input
jack of the optional
digital component
Optional digital component
C TAPE IN jacks
Use audio cords (not supplied) to connect an
optional analog component (tape deck, etc.) to
these jacks. You can then record or listen to the
sound from the component.
D TAPE OUT jacks
Use audio cords (not supplied) to connect an
optional analog component (tape deck, etc.) to
these jacks. Sound is then output to the
component.
To the audio input jack of
an optional analog
component
D
From the digital
output jack of the
optional digital
component
E
continued
79 GB