Table of Contents
Advertisement
About the supplied
M-crew
M-crew is software that allows you to operate
the system from a computer installed with the
software and connected to the system through a
USB cable. The operations you can perform are
disc (DVD, etc.), MD and tuner playback,
recording and editing, etc.
For details on the installation and basic
operation of M-crew, refer to the supplied M-
crew instruction manual (PDF). For details on
the advanced operation of M-crew, refer to the
online help for M-crew.
Note
Be sure to install the M-crew software to your
computer before connecting the system to your
computer. If you are reinstalling the software, be sure
to disconnect the USB cable before starting the
installation.
GB
76
Listening to audio files on
a personal computer
The supplied M-crew software allows you to
play back music data in your personal computer
that has been registered to M-crew, tune in
Internet radio stations, and perform other
operations using the system remote (PC
LIBRARY CONTROL). Music data in your
personal computer is registered to M-crew by
computer operations. Also, you cannot play
back tracks on the computer's hard disk or
through the CD-ROM drive using the system
remote. To play these tracks, operate the
computer. However, note that M-crew cannot
play tracks through the computer's CD-ROM
drive.
Be sure to check that the system and the
computer are connected correctly before
performing M-crew operations.
1
Start up the M-crew software installed
from the supplied CD-ROM.
Refer to the supplied M-crew instruction
manual (PDF) for the M-crew installation,
startup and setup methods.
2
Press FUNCTION repeatedly to switch
the function to PC.
Hide quick links:
Advertisement
Table of Contents
