Table of Contents
Advertisement
Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component. DHC-NXM2D is used for illustration purpose.
VCR or MD deck
To the audio input
jack of the connected
component
To the component
video input jack of
the TV or projector
TV or projector
A DIGITAL OUT jack (DHC-
NXM2D only)
Use a digital optical cord (square, not supplied)
to connect an amplifier with a digital optical
input jack. Sound is then output when the system
function is set to DVD. By connecting this
system to the optical input jack of the optional
amplifier equipped with Dolby Digital or DTS
decoder, you can enjoy the 5.1 channel sound. If
the jack is covered with a cap, remove it before
use.
Amplifier
To the digital input jack of
the digital component
To the video
input jack of a TV
TV
Note
When playing a CD-DA, VIDEO CD or MP3 audio
tracks, you cannot output digital audio.
B VIDEO/SAT IN L/R jacks
Use audio cords (not supplied) to connect an
optional analog component (VCR or satellite
tuner, etc.) to these jacks. You can then record or
listen to from the component through this
system.
VCR or satellite tuner, etc.
From the audio output
jack of the connected
component
To the S video input
jack of the TV
TV
continued
GB
55
Advertisement
Table of Contents
