Sony CMT-SE7 Operating Instructions Manual page 26

Notes
• When the selected language is not recorded on the
DVD, one of the recorded languages is automatically
selected (except for "OSD").
• If you select "OTHERSt" in "DVD MENU",
"AUDIO" or "SUBTITLE", select and enter the
language code from the language code list using the
number buttons (page 97). The selected language
code (4 digits) is displayed the next time you select
"OTHERSt".
x TRACK SELECTION (DVD only)
Gives the priority to the sound track which
contains the highest number of channels when
you play a DVD on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
The default setting is underlined.
OFF
AUTO
Notes
• When you set to "AUTO", the language setting may
change. The "TRACK SELECTION" setting has
higher priority than the "AUDIO" setting in
"LANGUAGE SETUP".
• If PCM, MPEG audio, DTS, and Dolby Digital
sound tracks have the same number of channels, the
system selects PCM, DTS and Dolby Digital, MPEG
audio sound tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, or Dolby Digital or
MPEG audio format by selecting "AUTO".
x AUDIO DRC (Dynamic Range
Compression)
Narrows the DYNAMIC range of the
soundtrack. Useful for watching movies at low
volume late at night.
The default setting is underlined.
OFF
STANDARD
MAX
Note
AUDIO DRC only works in Dolby Digital.
GB
26
No priority given.
Priority given.
No compression of DYNAMIC
range.
Reproduces the sound track with
the kind of DYNAMIC range that
the recording engineer intended.
Narrows the DYNAMIC range
fully.
x DATA CD PRIORITY (MP3, JPEG only)
Set priority data you want to play, when you
play the data disc (CD-ROM/CD-R/CD-RW)
contained MP3 audio tracks and JPEG image
files.
The default setting is underlined.
MP3 If an MP3 file exists on the disc,
the system recognises the disc as
an "MP3 Disc". If only JPEG files
exist on the disc, the system
recognises the disc as a "JPEG
Disc".
JPEG If a JPEG file exists on the disc,
the system recognises the disc as a
"JPEG Disc". If only MP3 files
exist on the disc, the system
recognises the disc as an "MP3
Disc".
Notes
• When you play a Multi Session data CD, the last
session and any sessions linked from the last session
are played.
• When you change the setting, re-load the disc.
x JPEG DATE
Change the date information order of a JPEG
image in the Control Menu.
The default setting is underlined.
MM/DD/YYYY
YYYY/MM/DD
DD/MM/YYYY
YYYY/DD/MM
YYYY: Year
MM: Month
DD: Day
Tip
You can reset all the DVD settings except for Parental
Control by performing the operations described under
"To return the DVD setup to the default settings*,
perform reset as follows:" (page 87).
* Except for Parental Control settings