Hooking Up Optional Components; Listening To Audio From A Connected Component; Recording A Cd On A Connected Digital Component; Recording Audio From A Connected Component - Sony CMT-EP707 Operating Instructions Manual

You can connect a digital or an analogue component to this system.
Optional analogue >
component
From the audio output
jacks of an analogue
component
/ !_:=:=::=::_:
[ [ Opgona, dioita)
component
To the digital input jack of a
digital component
[] MD IN jacks
Use audio cords (not supplied) to connect an
optional component (such as an MD player) to
these jacks. You can then record or listen lo
analogue audio fi_om that component through
this system.
[] OPTICAL DIGITAL OUT jack
Use a digital cable (square, not supplied) m
connect an optional digital component (such as
an MD recorder) to this jack. You can 1hen
make a digital recording ti'om this system lo
that digital component.
1 Connect the digital cable.
See "Hooking up optional components"
above.
2 Start recording.
Re_r to the operating instructions provided
wi(h lhe connected component.
1 Connect the audio cords.
See "t [ooking up optional components"
above.
2 Press MD to switch the function to MD.
Start playing the connected component.
1 Connect the audio cords.
See "Hooking up optional components"
above.
2 Start recording manually.
See "Recording to a tape" on page 14.
18G_