Sony CMT-SE7 Operating Instructions Manual page 68

9
Set the time to start playing.
Press V or v repeatedly to set the hour, then
press ENTER/YES.
The minute indication flashes.
Press V or v repeatedly to set the minute,
then press ENTER/YES.
10
Set the time to stop playing following
the same procedure as step 7 to 9.
11
Press V or v repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
t TUNER y DVD PLAY T
12
Press ENTER/YES.
The timer settings appear, then the original
display returns.
13
Press ?/1 to turn off the system.
Other operations
To
Check the setting/
active the timer
Change the setting
Cancel the timer
To cancel the operation
Press MENU/NO.
GB
68
t MD PLAY T
Do this
1
Press CLOCK/TIMER
SELECT.
2 Press V or v repeatedly until
"TIMER SELECT?"
appears, then press ENTER/
YES.
3
Press V or v repeatedly until
"PLAY ON?" appears, then
press ENTER/YES.
Start over from step 1.
1
Press CLOCK/TIMER
SELECT.
2 Press V or v repeatedly until
"TIMER OFF?" appears,
then press ENTER/YES.
Notes
• If you use the Play Timer and the recording timer at
the same time, the recording timer has priority.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The system turns on 30 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on 30 seconds before the preset time,
the Play Timer will not be activated.
• You cannot use the optional component connected to
TAPE IN or DIGITAL OPTICAL IN jacks as the
sound source for Play Timer.
Tip
If you operate this unit with the lid closed, "OPEN"
blinks in the front panel display. Open the lid and
confirm the displayed message before proceeding.