Undoing The Last Edit; Undo Function - Sony CMT-SE7 Operating Instructions Manual

6
Press ENTER/YES again if the point to
be divided is correct.
"Complete!" appears for a few seconds and
the newly created track starts playing.
If the point to be divided is incorrect,
press V or v to find the point to be divided,
then press ENTER/YES.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 stereo mode) or by 4-
frame intervals (in LP4 stereo mode).
Note
If you divide a labelled track (page 50) into two tracks,
only the first track retains the track title.
Example:
1 2 3
B
A
1 2 3
A B
The new track is not labelled.
Tip
To shift the point by minute or second intervals in
step 6, press B or b repeatedly to flash minute, second,
or frame indication, then press
Second
Minute
4
C
4 5
C
V or v.
Frame

Undoing the last edit

— Undo Function

You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo the edit if
you do any of the following after the edit:
• Do another edit.
• Do the recording procedure.
• Activate the Net MD function.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
Open the lid before performing the following
operations.
1
Press MENU/NO in stop mode.
2
Press V or v repeatedly until "Undo?"
appears.
"Undo?" does not appear when there is no
editing function that can be cancelled.
3
Press ENTER/YES.
Following message appears depending on
the last edit.
Editing
Labelling discs or tracks
Erasing the titles
Creating a new group
Releasing a group
Releasing all groups
Deleting a portion of a
track
Deleting a track
Deleting all the tracks
Moving tracks
Dividing a track
Combining tracks
4
Press ENTER/YES again.
Note
You cannot undo the S.F Edit Function.
Message
Name Undo?
Group Undo?
Erase Undo?
Move Undo?
Divide Undo?
Combine Undo?
continued
59 GB