Starting Recording With 6 Seconds Of; Prestored Audio Data; Time Machine Recording - Sony CMT-SE7 Operating Instructions Manual

To record using the Group
Function
Press MD GROUP repeatedly until "GROUP
ON" appears after step 2. Press GROUP SKIP
repeatedly until "New Group" or the desired
group appears after step 4.
Note
The "LFE" setting in "Speaker Settings" automatically
switches to "OFF", even if it was previously set to
"ON" in the settings screen (see page 33).
Tips
• If you want to record manually in the middle of a
track loaded in this system, move DVD stick to
N
X before step 4 to pause the playback, then move
N
X again in step 5 to start playback.
it to
• You can check the remaining recordable time on the
MD during recording by pressing DISPLAY on the
unit.
• If cyclical static noise is heard while recording an
AM radio program, move the AM loop aerial to
reduce the noise.
• For details about LP2/LP4 recording, see "Recording
for long times" on page 39.
• You can adjust the recording level (page 46).
Starting recording with
6 seconds of prestored
audio data

— Time Machine Recording

When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to ascertain
the contents and press the record button. To
prevent the loss of this material, the Time
Machine Recording feature constantly stores the
most recent audio data in a buffer memory. This
lets you record the sound from 6 seconds before
starting recording, as shown in the illustration
below:
Start recording
(step 6)
6
seconds
Beginning of the source to be recorded
Open the lid before performing the following
operations.
1
Load a recordable MD.
2
Press FUNCTION repeatedly to select
the desired source to record.
3
Press REC MODE on the unit
repeatedly to select the recording
mode.
Select the desired recording time.
Recording time Select
(Recording mode)
Standard no indication (stereo)
Double LP2 (LP2 stereo)
Quadruple LP4 (LP4 stereo)
Double MONO (monaural)
(change the stereo
signal to monaural)
4
Press REC/REC IT on the unit.
The MD deck stands by for recording.
Stop recording
Time
Recorded
portion
continued
43 GB