Combining Recorded Tracks; Combine Function - Sony CMT-SE7 Operating Instructions Manual

Note
When you move a track to a track number that is
registered into a group, the moved track is re-registered
into the group. In addition, if you move a track that is
registered into a group to a track number that is not
registered into a group, the group registration of the
moved track is released. However, when the Group
Function is on, you can only move tracks within the
selected group.
Combining recorded
tracks

— Combine Function

You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
Example: Combining track 3 to track 1
Track number
1 2
Original
A
tracks
1
After
A
COMBINE
Example: Combining track 1 to track 4
1 2
Original
A
tracks
1 2
After
B C
COMBINE
Open the lid before performing the following
operations.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press V or v repeatedly until
"Combine?" appears, then press
ENTER/YES.
Playback starts.
3 4
B C D
2 3
C B D
3 4 5
B C D
3 4
D A
continued
57 GB