Sony CMT-SE7 Operating Instructions Manual page 9

3 Connent the video input jack of your TV
to the VIDEO OUT jack with the video
cord.
When using a TV
Turn on the TV and select the video input so that you
can view the pictures from this system.
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
TV
Video deck
Do not connect
directly.
If you connect a video deck between this system and the
TV, you may experience video leakage when watching
the video signal from this system. Do not connect a
video deck between this system and the TV.
Note
Do not place the TV on this system.
Tip
For even higher quality video images:
– Use an optional component video cord to connect
the COMPONENT VIDEO input jacks on your TV
to the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
"COMPONENT OUT" to "PROGRESSIVE" in
"Adjusting the TV screen" (page 27).
– You can use an optoinal S-video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack.
4 Connect the mains lead on the unit.
If the plug does not fit your wall socket,
detach it from the plug (only for models
equipped with an adapter).
To turn on the system, press
5 Set the color system to PAL or NTSC
Note
When you play back a VIDEO CD recorded in a
different color system from the one you set to the unit,
the picture image may be distorted.
To connect optional components
See page 79.
System
Inserting two size AA (R6)
batteries into the remote
Notes
• If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
• See page 103 for the location of the remote sensor.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
?/1 .
depending on the color system of your
TV.
The color system is factory set to NTSC.
Each time you perform the procedure
below, the color system changes as follows:
NTSC PAL
y
Use buttons and sticks on the top of the unit
for the operation.
1
Press ?/1 to turn off the system.
2
While pushing the SA-CD/DVD stick
toward m, press Z and VOLUME +.
The system turns on and the color system
is changed.
continued
9 GB