Undoing The Last Edit - Undo Function - Sony CMT-PX5 Operating Instructions Manual

Combining recorded tracks
(continued)
To cancel combining
Press MENU/NO.
To return to the condition before
COMBINE
You can return to the original condition
immediately after combining the tracks (see this
page). You can also return to the original
condition by using the Divide function (see page
47).
Notes
• Tracks recorded in different recording modes
(stereo, LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
• If "Impossible" appears, the tracks cannot be
combined. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
50
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if you
do any of the following after the edit:
• Do another edit.
• Start recording.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
You cannot undo the S.F Edit function even if you
use the Undo function.
2
1
1
Press MENU/NO in stop mode to
display "Edit Menu".
2
Press – or + repeatedly until "Undo?"
appears.
"Undo?" does not appear, when there is no
editing function that can be cancelled.
3,4
2