Table of Contents
Advertisement
Recording on an MD manually
(continued)
Tips
• If you want to record manually in the middle of a
track loaded in this system, press DVD NX (or
DVD X on the remote) before step 4 to pause the
playback, then press DVD NX (or DVD N on
the remote) in step 5 to start playback.
• You can check the remaining recordable time on the
MD during recording by pressing DISPLAY on the
remote.
• If cyclical static noise is heard while recording an
AM radio program, move the AM loop antenna to
reduce the noise on connect a ground wire to the U
terminal.
• For details about LP2/LP4 recording, see page 46.
• You can adjust the recording level (page 45).
Starting recording with
6 seconds of prestored
audio data
— Time Machine Recording
When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to
ascertain the contents and press the record
button. To prevent the loss of this material, the
Time Machine Recording feature constantly
stores the most recent audio data in a buffer
memory. This lets you record the sound from
6 seconds before starting recording, as shown
in the illustration below:
Start recording (step6)
6
seconds
Beginning of the source to be recorded
GB
42
Stop Recording
Time
Recorded
portion
1
Load a recordable MD.
2
Press FUNCTION repeatedly to select
the desired source to record.
3
Press REC MODE repeatedly to select
the recording mode.
Select the desired recording time.
Recording time
Standard
Double
Quadruple
Double
(change the stereo
signal to monaural)
4
Press z MD (or MD z on the remote).
The MD deck stands by for recording.
5
Start playing the desired source to
record.
6
Press ENTER/YES on the remote at the
desired point to start recording.
To stop Time Machine Recording
Press x (or MD x on the remote).
Tip
For details about LP2/LP4 recording, see page 46.
Note
The MD deck starts storing audio data when the deck
stands by for recording in step 4 and you start playing
the source. If less than 6 seconds have passed when
you press ENTER/YES on the remote, Time Machine
Recording starts with less than 6 seconds of audio
data.
Select
(Recording mode)
no indication
(stereo)
LP2
(LP2 stereo)
LP4
(LP4 stereo)
MONO
(monaural)
Hide quick links:
Advertisement
Table of Contents
