Table of Contents
Advertisement
Set to Slave - after a preset program is defined on a Master fixture, other SolaFrame 750 fixtures
l
on the same DMX data link can be designated slaves to playback the configured Program (Part 1,
2, or 3) as defined on the Master fixture.
Auto Program - sets the fixture to run an internal program alone or as a master. The program that
l
runs is determined under the "Select Prog." menu.
5. Press [Enter] to select or press the [MODE/ESC] button to return the display to the previous menu.
Select Prog.
This menu is provided to select the auto program the fixture will run.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Preset" option displays, then press [Enter]. The "Preset" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Select Prog." option displays, then press [Enter]. The "Select
Prog" menu displays.
4. Tap the [Up] or [Down] button to cycle through and select from the available program options (Prog.
Part1, ... Part2, etc.), then press [Enter].
5. Press the [Up] or [Down] button to choose the Program to run for the selected part, then press [Enter]. The
display returns to the main menu.
Edit Program
This menu is provided to edit the steps in the internal auto programs.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Preset" option displays, then press [Enter]. The "Preset" menu dis-
plays.
3. Tap the [Up] or [Down] button until the "Edit Program" option displays, then press [Enter]. The "Edit
Program" menu displays.
4. Tap the [Up] or [Down] button to cycle through and select from the available program options (Program 1,
Program 2, etc.), then press [Enter]. The "Edit Program" menu displays.
5. Press the [Up] or [Down] button to choose the first step to edit from the available options, then press
[Enter].
6. Press the [Up] or [Down] button to select the program action from the available options, then press [Enter].
7. Repeat for each step if desired. Press [Enter] with each edit.
8. To return to the main menu, press the [MODE/ESC] button.
37
Advertisement
Table of Contents
