Clear Led Time - High End Systems SolarFrame 750 User Manual

1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "LED Timer PIN" option displays, then press [Enter]. The
"LED Time PIN" menu displays.
5. Tap the [Up] or [Down] button to change the pin value. The default PIN code is "038".
6. Press [Enter] to apply a change or press the [MODE/ESC] button to return to the previous menu.

Clear LED Time

This menu is protected by password, accessible only when the LED Timer PIN has been provided in the pre-
vious menu. When accessed, this menu enables you to clear the last run time of the fixtures LED timer.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Time Info." option displays, then press [Enter]. The "Time Info"
menu displays.
4. Tap the [Up] or [Down] button until the "Clear LED Time" option displays, then press [Enter].
5. Press the [Up] or [Down] button to change the setting to either Yes or No.
6. Press [Enter] to apply a change or press the [MODE/ESC] button to return to the previous menu.
Error Info
This menu displays all discovered errors related to the fixture.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Error Info." option displays, then press [Enter]. The current fixture
errors display.
4. Press [Enter] or press the [MODE/ESC] button to return to the previous menu.
DMX Value
This menu displays the DMX value of each of the fixture's channels and allows you to change a DMX value for a
channel (parameter of the fixture).
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "DMX Value" option displays, then press [Enter]. The DMX Value
settings menu displays.
4. Tap the [Up] or [Down] button to cycle through the available channels (All, Pan, Tilt, etc.), then press
[Enter] to modify a selection. The current address displays for the selected channel.
5. Press the [Up] or [Down] button to edit the address setting.
6. Press [Enter] to apply a change or press the [MODE/ESC] button to return to the previous menu.
Head Temp
This menu displays the current fixture temperature as read from the fixture head (near the CMY filter).
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Info" option displays, then press [Enter]. The "Info" menu displays.
3. Tap the [Up] or [Down] button until the "Head Temp" option displays, then press [Enter]. The current tem-
26