Table of Contents
Advertisement
Animation1
This message displays after the reset of the fixture if any of the following conditions exist:
if the magnetic-indexing circuit malfunctions (optical or magnetic sensor failure)
l
if the stepper motor is defective or the related IC driver on the main PCB has failed
l
if the Animation movement is not located in the default position after the reset
l
Blade1
This message displays after the reset of the fixture if any of the following conditions exist:
if the magnetic-indexing circuit malfunctions (optical or magnetic sensor failure)
l
if the stepper motor is defective or the related IC driver on the main PCB has failed
l
if the Blade Rotation movement is not located in the default position after the reset
l
46
Advertisement
Table of Contents
