Menu Settings And Programming - High End Systems SolarFrame 750 User Manual

Menu Settings and Programming

This section details instructions to configure and set up the SolaFrame 750 using the provided user interface and
menu.
Note:
The procedures below assume the fixture is powered.
Alternatively, when the fixture is not powered, the display is powered by battery. Press and
hold the [MODE/ESC] button for three seconds to turn on the display using battery power.
Address
Set the starting DMX address.
1. Press the [MODE/ESC] button to display the main menu.
2. Tap the [Up] or [Down] button until the "Address" option displays, then press [Enter]. The display will show
the Address menu with the current address (by default this is 001).
3. Tap the [Up] or [Down] button to change the starting DMX Address number.
4. Press [Enter] to confirm. The new address is set and the display returns to the main status screen. Altern-
atively, press [MODE/ESC] to return to the main menu without saving the address change.
23